Manual for oven use

Manual for oven use

1. Before use, it is necessary to pay attention to whether the power supply voltage can meet the requirements. When using, the grounding cable of the power socket must be grounded according to the rules.

2. When using power, do not touch the electrical appliances on the left side of the box with your hand or wipe with wet cloth and rinse with water. The power supply should be cut off during inspection.

3. The power cord should not be wrapped around metal objects, and should not be set in a low temperature or wet center to avoid leakage caused by rubber aging.

4. Do not overcrowd the items in the box, and it is necessary to leave space for natural convection of the atmosphere, so that the wet atmosphere can slow down and escape at the top of the wind.

5. Check whether the silver contact of the temperature conditioner can be hairy or uneven. If so, the contact can be sanded flat with fine gauze and then used, and should be wiped with a clean cloth often to make it have good contact (note that the power supply must be cut off). Do not strike the metal pipe of the indoor temperature conditioner so as not to affect the flexibility.

6. Do not put flammable materials in the dry box without explosion-proof installation.

7. After each use, the power supply must be partially cut off, and the inside and outside of the box must be kept clean.